The hot tubbalticspa.co.uk can be implemented in the form of both complex and simplified designs. For example, complete with a polypropylene bowl sheathed with wood, there will be a layer of insulation for the walls and floor, an insulated lid, a drain system, hydromassage and lighting, as well as a stove made of stainless steel. For the convenience of using the font, there is also a suspended ladder with a stand and handrails. Much cheaper for the buyer is a wooden hot tub equipped with stainless steel hoops. The shape of the font can be a circle, oval, rectangle or polyhedron. There are also corner designs.


The heating of the font differs depending on the type of the structure itself. For example, it is customary to heat metal containers through the bottom. The container is installed above a stone platform, where a small stove is assembled, then heated with wood. Outdoor plastic and wooden mini-pools are heated using wood-burning stoves equipped with a built-in coil.

Boiling water from the stove flows either directly into the bowl, or into a system of pipes running along the perimeter of the font. Some plastic tanks use a submerged oven.


Street
An outdoor hot tub is a heated tank installed outdoors. For example, it can be a Japanese furako bowl, with its appearance resembling a giant barrel, inside which a bench is placed around the perimeter. To heat the liquid, a wood-burning stove is used, which is immersed directly in water. In the event that the furaco is mounted indoors, the wood-burning stove can be replaced with an electric one.

The original version is a tub made of a eurocube - a plastic container with a volume of 1000 liters.

Since the parameters of a cubic container do not differ in size, an adult will be able to sit in it only with his legs tucked in.


Internal
Indoor hot tubs, as a rule, are installed in appropriate premises: baths or saunas. Quite often we are talking about a Finnish thermowood barrel, and a more comfortable oval shape. Eco-friendly material provides both healing and relaxation. A mini sauna tub is also available for children.


Form and material for making the font
Before deciding on any specific material and model of the font, you need to know exactly what options for a street bath will be most in demand. There are a lot of options for the execution of a street font, and most often manufacturers are guided precisely by the appearance, and not by consumer qualities.

The classic version of Furaco

Outdoor fonts are manufactured in several form factors:

Classic wooden outdoor font in the form of a barrel-tub. It is considered the safest and most environmentally friendly, but in practical use, such a bath is a lot of trouble;
A plastic outdoor font, usually of large sizes, is built with a facing with a plastic deck board or with a natural oak plank finish. It is very reliable and durable, does not require special care, you can safely leave it on the terrace to winter without any consequences for the plastic shell;
Stainless steel hot tubs are the most expensive and not always the most convenient to use. They cost several times more than plastic ones. They withstand even the most barbaric heating methods, including thermal shock. The service life is several tens of years;
Cast iron hot tub, the most difficult to maintain and install. An outdoor cast iron heated bathtub is bought mainly by connoisseurs and true connoisseurs of this kind of relaxation.
Cast iron must be regularly cleaned and washed, otherwise rust will appear. Additional constant heating in outdoor conditions is not required, it is enough to warm up the cast-iron hot tub once to enjoy water procedures for an hour and a half.

There are also composite and ceramic models, in which the inside of the mini-pool is covered with a special compound that prevents corrosion or salt deposition during the heating of the water.

Outdoor plastic hot tub
The interior of the mini-pool is made of polypropylene plastic, which provides good heat retention, you don't have to worry about the surface condition. The plastic walls of a street bath are hard enough to scratch or break through. If you are looking for a suitable version of a hot tub for a summer residence, then a polymer bath will do just right.

Heated outdoor hot tub

Heated plastic all-weather barrel

In addition to the fact that a 1.5 m3 street tank in the courtyard of the summer cottage can be used as a backup source of water, the plastic mini-pool has a number of advantages and benefits over other types of hot tubs:

Firstly, the body is not subject to corrosion, even if you use a plastic mini-baissein several times a week, actively use water heating and regularly wash the walls using modern detergents. Even in such harsh conditions, a street font with a stove will last at least one and a half years;